Deep Fried Halibut In Alexander Keith Beer Batter Recipes

BEER-BATTERED HALIBUT WITH TARTAR SAUCE

Steps:

• For the tartar sauce: In a bowl, add the parsley, tarragon, shallot, and cornichon. Chop the hard boiled egg by removing the yolk and crumbling it, then dice the white. Add both yolk and whites to the bowl. Add vinegar, salt, mustard, mayonnaise, and a few dashes of hot sauce (or more to taste). Stir to combine and set aside.
• For the beer batter: In a large mixing bowl, mix the cake flour and baking soda with a fork. Slowly pour in the beer, stirring the entire time (it's okay if there are a few lumps). The batter should be thin, falling off the fork easily so it coats the fish, not heavy like pancake batter. Set aside.
• Fry the halibut: Fill a deep heavy-bottomed pan with oil-don't go higher than 2 inches from the rim-and heat to 350 degrees F. Season the halibut with salt on both sides. Test the oil by cooking a few drops of batter; they should float to the surface when the oil's hot enough. Remove these "tester crunchies" with a slotted spoon. One piece at a time, drop the fish into the beer batter, then remove it, letting the excess drip off. Then place it halfway into the oil, letting a crust form for 10 seconds, then releasing it gently into the pan. Repeat with two more pieces (three at a time), so the pan isn't overcrowded and cook each for 3-4 minutes. Remove the fish to a baking sheet fitted with a wire rack to drain any excess oil. Season with flaky sea salt and serve with tartar sauce and lemon wedges.

BEER BATTERED HALIBUT

Steps:

• Whisk together the flour, salt, pepper, garlic and paprika. Whisk in just enough beer to make the consistency pourable, but not too thin. The mixture should resemble pancake batter. Set the batter and the fish pieces in separate bowls next to the stove.
• Pour the oil into a heavy bottomed saucepan and warm it over medium high heat. You want it to be as hot as possible, without smoking. When the oil is hot, drop a few pieces of fish into the batter and coat well. Shake off the excess batter and using metal tongs, gently place the fish into the oil. Hold it there for a few seconds before releasing it, so that the coating will seal and it won't stick to the other pieces or the bottom of the pan. Repeat the process, cooking just a few pieces at a time to avoid crowding.
• Let them cook for a few minutes, until the coating is lightly browned. (I found it easiest to use separate tongs for coating the fish and for frying in the oil.) Remove from the oil with clean tongs or a large wire scoop (made for frying) and drain on a plate lined with paper towels. Test a piece with a fork to make sure the center is cooked and flaking. Serve with Dill Sauce and Enjoy!

CRISPY BEER BATTERED HALIBUT

Steps:

• Slice fish into rectangular fillets, roughly 6 inches by 2 inches. Remove skin if needed and pat dry with paper towels.
• Prepare your batter by adding 1/2 cup whole wheat flour, Old Bay, and egg to a shallow bowl. Stir a couple of times to break the yolk. Add beer and use a whisk or fork to combine until smooth. Set aside.
• Add vegetable oil to a large pot or saucepan, so that the oil is about 3 inches deep. Turn your heat source up to medium and monitor the temperature of the oil with a kitchen thermometer. Your target is to get your oil to 375°F.
• In a second shallow bowl, add 1/4 cup of whole wheat flour.
• Working with one fish fillet at a time, dip your fish into the flour first, coating completely. Then, take your flour-coated fish and dunk it into your beer batter, making sure you have an even layer of batter coating your fish.
• Carefully drop your battered fish into the hot oil, frying for 4 minutes total. Use a skimmer or sieve to flip the fish after 2 minutes, to ensure an even cook. Repeat with all of your fish fillets, making sure to not overcrowd your oil-the battered fish will stick together if they get too close.
• Carefully remove your fried fish from the oil and place it on a paper towel to absorb excess oil.
• Serve immediately with lemon wedges.

LIGHT AND CRISPY FRIED HALIBUT

Steps:

• Heat oil in a deep-fryer or large saucepan to 350 degrees F (175 degrees C).
• Whisk eggs, milk, and flour together in a shallow bowl. Stir panko bread crumbs and seasoned bread crumbs together in another bowl.
• Gently dip halibut squares into egg mixture, the press gently into bread crumbs mixture to generously coat completely. Place breaded halibut in a single layer on a plate while breading the rest.
• Cook halibut in preheated oil until golden brown and crisp on the outside, 4 to 6 minutes.

BEER BATTER FOR HALIBUT OR CHICKEN

Steps:

• Heat deep fryer or skillet with vegetable oil deep enough to cover meat to 375.
• Beat egg, and add remaining ingredients.
• Rinse and dry meat on paper towels in order for it to hold batter.
• Dip meat into batter and place in deep fryer or skillet.
• Cook for approx 4 minutes or until golden brown.
• Drain on paper towels.

BEER BATTER FISH MADE GREAT

Steps:

• Heat oil in a deep fryer to 365 degrees F (185 degrees C). Rinse fish, pat dry, and season with salt and pepper.
• Combine flour, garlic powder, paprika, 2 teaspoons salt, and 2 teaspoons pepper. Stir egg into dry ingredients. Gradually mix in beer until a thin batter is formed. You should be able to see the fish through the batter after it has been dipped.
• Dip fish fillets into the batter, then drop one at a time into hot oil. Fry fish, turning once, until both sides are golden brown. Drain on paper towels, and serve warm.

FRIED FISH WITH VODKA AND BEER BATTER

Steps:

• Rinse fish fillets, and dry with paper towels. Season well with salt and pepper, and dust with rice flour, shaking off any extra. Set aside.
• Place a wide, deep pan over medium heat. Add oil to a depth of at least 1 1/2 inches, and bring to 375 degrees on a deep-fry thermometer. In a medium bowl, mix together the all-purpose flour, 1 1/4 cups rice flour, baking powder and 1/2 teaspoon salt. Slowly stir in the vodka and beer to make a batter. (Don't make batter ahead of time, or the bubbles from the lager will be lost.)
• Dip one fillet into batter to coat it completely, then lower into hot oil. Repeat with other fillets, working in batches if needed. When undersides of fillets are golden brown, after 1 or 2 minutes, turn, and brown other sides, a minute or two. Lift from oil, drain and serve.

BEER BATTER HALIBUT

Steps:

• Divide halibut fillet into approximately 1.5" cubes.
• Mix dry ingredients, add beaten egg. Pour beer in until proper consistency. Batter will be smooth and a little runny but thicker than water.
• The remaining beer is yours to enjoy.
• Add oil to frying pan until oil is approximately 1/2 the height of the halibut cubes; heat on medium high until suitable for deep frying.
• Make a test piece:.
• Coat halibut piece in batter, add to oil. Fry for two minutes, then turn with tongs (being very careful of oil spattering) and fry another two minutes. Transfer finished piece to a paper towel covered plate. Split piece with fork to check for doneness, if piece does not split easily and/or middle of halibut piece does not appear to be opaque, adjust cooking time and/or oil temperature to ensure pieces are done.
• When satisfied with cooking time, repeat until all pieces have been cooked (multiple pieces can be put in pan).
• Serve warm with tartar sauce.

DEEP FRIED HALIBUT IN ALEXANDER KEITH BEER BATTER RECIPE

Steps:

• Dust halibut fillets with cornstarch. Mix flour, salt and pepper & baking powder. Add beer gradually, stirring well until smooth. Dip fillets into batter. Cook in hot oil until golden brown. Drain on absorbent paper. Serve with lemon wedges and tartar sauce.