Robs Rib Rub Recipes

RIB RUB FOR FALL-OFF-THE-BONE RIBS

Steps:

• Combine white sugar, brown sugar, salt, paprika, black pepper, garlic powder, onion powder, and cayenne pepper in a container with a lid; shake until rub is evenly combined.
• Generously rub both sides of each rib rack with rub.
• Preheat grill for medium heat and lightly oil the grate.
• Place 1 rack of ribs, meaty-side down, in the center of main grill rack; cook for 5 minutes; transfer to the far side of top grill rack, meaty-side up. Repeat process with remaining rib racks.
• Angle the rib racks on the top grill shelf so the meaty sides are facing out and they are stacked one in front of the other at an angle. Turn off heat directly below the ribs and turn other burner on low; close the grill lid and cook for 30 minutes.
• Flip ribs so the closest side to the flame is the furthest side and the meaty side is still facing forward and the rack that was in the front is now in the back. Continue to cook, flipping every 30 minutes, until outsides are crispy and meat is tender, about 5 hours. Slice into small chunks.

BEST DRY RUB FOR RIBS

Steps:

• Mix all ingredients in a bowl. Use a fork to crush any clumps of sugar or seasonings. Store in an airtight container for up to a month.

RIB DRY RUB

Steps:

• Combine all ingredients in a large bowl and mix well. Store in an airtight container. Pack on the dry rub onto your next rack of ribs.

TRADITIONAL RUB FOR ST. LOUIS RIBS

Steps:

• About one hour before smoking, make the dry rub. Combine sugar, paprika, mustard, salt, garlic, onion powder and coriander in small bowl; mix well. Coat both sides of ribs with a little vegetable oil and sprinkle with seasoning rub. Set aside at room temperature for 1 hour.
• Heat charcoal or gas grill for indirect cooking at 230 to 250 degrees F. Add drained wood chips, if using.
• Place the ribs, meaty side down, over a drip pan and cook for 2 hours. If desired, spray both sides of ribs with apple juice. Add about 12 coals to a charcoal grill every 45 minutes or so to maintain the heat.
• Remove ribs from grill. Double-wrap each rack in heavy-duty aluminum foil. Return wrapped ribs to the grill and cook for 1 1/2 to 3 hours more over indirect heat, until very tender. Add more coals as needed to maintain temperature for a charcoal grill.

RIB RUB

Steps:

• With a wooden spoon, blend the brown sugar, cayenne, garlic powder, onion powder, white pepper, salt, dry mustard, black pepper, seafood seasoning and ginger powder until mixed. Then bag until usage.

DRY RUB FOR RIBS

Steps:

• Mix together the brown sugar, paprika, salt, black pepper, and garlic powder. Rub into pork ribs. For best results, allow ribs to marinate overnight. Grill ribs as desired.

HICKORY-SMOKED BABY BACK RIBS

Steps:

• The Rainford Method
• For the ribs, stir together the sugar, salt, smoked paprika, chili powder, regular paprika, onion powder, black pepper and thyme. Set aside.
• With a small, sharp knife, release the edge of the membrane on the back of each rack of ribs. Grasp the edge with needle-nose pliers or a piece of paper towel and peel the membrane off the rack. (If you leave the membrane on, the ribs will be chewy.)
• Spread the dry rub all over each rack of ribs until completely coated. Make sure you press the dry rub into the meat. This is where your flavor is going to come from. Arrange the ribs in a rib rack, with all the racks facing the same direction. A rib rack has 8 slab compartments, looks like a rack of coat hangers and can be purchased at most barbecue stores.
• Fire up your charcoal grill and prep the grill for cooking over indirect heat. You need a low temperature of around 250 to 300°F (120 to 150°C) to grill the ribs. For gas grills, preheat the grill to low then turn off one side of the grill to achieve indirect heat. Place a drip tray on the cooler side of the grate and half fill the pan with warm water or the beer of your choice.
• Drain 2 chunks of hickory, place them on top of the charcoal and set the grate in place. For gas barbecues, place half of the hickory chips in a foil pouch and place the pouch directly on the heated side of the grill. Wait for the hickory to start to smoke.
• Place the rib racks over indirect heat as far from the heat as possible, with the bone sides facing toward the heat. Close the lid and close the top vent on a charcoal grill about halfway. This will maintain a temperature between 250 and 300°F (120 and 150°C). Cook the ribs for 2 hours.
• Once the ribs are on, it's time to start working on the barbecue sauce. If you have a side burner this can be done outside. If you don't, go inside and use your stove top to simmer your sauce. Combine all the ingredients in a small saucepan set over medium heat. Simmer for 20 to 30 minutes or until the sauce reaches a glaze consistency. Remove the saucepan from the heat and set aside to cool.
• The first batch of charcoal should be cooling down after 2 hours. Now is the time to use your chimney starter and get another batch of charcoal lit. Add the remaining wood chunks to the coals to get a little more smoke. If using a gas grill, wrap the remaining chips in foil and place directly on the hotter side of the grate. Close the lid and grill for another 2 hours. Make sure to come back every hour on the hour to check the temperature and to add more charcoal, if necessary. In the last hour of grilling, your ribs will start to show signs of cooking all the way through. When the meat pulls back from the bone, the ribs are almost ready. Baste the ribs with the barbecue sauce during the last 5 to 10 minutes of cooking. I like to tent my ribs before serving, so take them off the grill and let them rest, loosely covered with foil, for 10 minutes.

PORK RIB RUB

Steps:

• Mix paprika, sea salt, garlic powder, black pepper, ginger, onion powder, rosemary, and cayenne pepper together in a bowl.