Mikes Beer Can Chicken Recipes

BEER CAN CHICKEN

Steps:

• Prepare the grill: If you are using charcoal, put the coals on one side of the grill, leaving another side free of coals. If you are using a gas grill, fire up only half of the burners.
• Season the chicken and rub it with oil: Remove neck and giblets from cavity of chicken, if the chicken came with them. Mix the salt, pepper, and thyme in a little bowl, and rub it all over the chicken. Rub the chicken all over with olive oil.
• Lower chicken onto half-filled beer can: Make sure the beer can is open, and only half-filled with beer (drink the other half!) If you want, you can put a sprig of thyme (or another herb like rosemary or sage) in the beer can. Lower the chicken on to the open can, so that the chicken is sitting upright, with the can in its cavity.
• Carefully transfer the chicken to a tray or pan: I say "carefully" because the beer can, and the beer inside of it, is quite hot. One way to do this is to slide a metal spatula under the bottom of the beer can. Use tongs to hold the top of the chicken. Lift the chicken, beer can still inside, and move it to a tray. Let the chicken rest for 10 minutes. Carefully lift the chicken off of the can. If it gets stuck, lay the chicken on its side, and pull out the can with tongs.

BEER CAN CHICKEN

Steps:

• Preheat an outdoor grill for medium-high heat, about 375 degrees F (190 degrees C). Mix the brown sugar, chili powder, paprika, dry mustard, salt, and ground black pepper in a small bowl. Place the half-full can of beer in the center of a plate.
• Rinse chicken under cold running water. Discard giblets and neck from chicken; drain and pat dry. Fit whole chicken over the can of beer with the legs on the bottom; keep upright. Sprinkle 1 teaspoon of the seasoning mix into the top cavity of the chicken. The beer may foam up when the seasonings fall inside the can. Rub the remaining seasoning mix over the entire surface of the chicken.
• Place the chicken, standing on the can, directly on the preheated grill. Close the lid and barbeque the chicken until no longer pink at the bone and the juices run clear, about 1 hour 15 minutes. An instant-read thermometer inserted into the thickest part of the thigh, near the bone should read 180 degrees F (82 degrees C). Remove the chicken from the grill and discard the beer can. Cover the chicken with a doubled sheet of aluminum foil, and allow to rest in a warm area for 10 minutes before slicing.

MIKE'S BEER CAN CHICKEN

Steps:

• Preheat grill to medium.
• Open beer and drink half.
• Empty rest of the beer into bowl and stir in rest of ingredients.
• Pour mixture back into can.
• Shove can up chicken's butt.
• Set on grill using legs and can as a tripod and close grill.
• Cook about one hour (until juices run clear).
• The less often you peek, the quicker it will be done.