Marshmallow And Peppermint Bark Recipes

PEPPERMINT MARSHMALLOWS

Steps:

• Line a 9x9 inch baking dish with lightly greased foil or plastic wrap. Grease another piece of foil or plastic wrap to cover the top, and set aside.
• Place 1/2 cup of water in the bowl of an electric mixer, and sprinkle gelatin on top of water to soak.
• While gelatin is soaking, combine 1/4 cup of water, corn syrup, and sugar in a saucepan, and bring to a boil over medium heat. Boil the mixture hard for 1 minute.
• Pour the hot sugar mixture into the gelatin mixture and beat on high for 12 minutes with electric mixer, until the mixture is fluffy and forms stiff peaks. Add vanilla and peppermint extracts, and beat just until blended.
• Pour the marshmallow mixture into the prepared baking dish, using a greased spatula to smooth the top of the candy. Cover the candy with the reserved greased foil or wrap, and press down lightly to seal the covering to the top of the candy.
• Allow the marshmallow candy to rest for 4 hours or overnight. Mix together cornstarch and confectioner's sugar in a shallow dish. Using oiled scissors or an oiled kitchen knife, cut the marshmallow candy into strips, then into 1 inch squares. Dredge the marshmallows lightly in the cornstarch mixture and store in an airtight container.

PEPPERMINT-MINI MARSHMALLOW BARK

Steps:

• Line a baking sheet with foil, shiny-side up; smooth out the creases. Make sure all your tools are dry.
• Chop the white chocolate into 1/2-inch pieces with a large knife. Place all but 1 cup of the chopped chocolate in a microwave-safe bowl. Microwave 30 seconds, then stir with a rubber spatula. Continue microwaving and stirring at 30-second intervals until melted, 3 to 5 minutes total. Immediately add the reserved chopped chocolate to the bowl; stir vigorously until melted and shiny. Don't worry if there are a few small unmelted pieces.
• Pour the white chocolate onto the prepared baking sheet; use the rubber spatula to spread it into a 10-to-12-inch circle, about 1/4 inch thick.
• Press the peppermints and marshmallows into the chocolate, arranging them so each bite has a mix of flavors and textures. Let the bark harden completely at room temperature, about 1 hour. (If the room is warm, you may need to freeze the bark for a few minutes.) Break into pieces and store in an airtight container at room temperature for 1 to 2 weeks.

ALMOST-FAMOUS PEPPERMINT BARK

Steps:

• Line a 9-by-13-inch baking dish with aluminum foil, shiny-side up; smooth out any wrinkles. Heat 1 inch of water in a saucepan over low heat until steaming.
• Put all but 3/4 cup of the semisweet chocolate in a heatproof bowl. Set the bowl over the saucepan of steaming water (do not let the bowl touch the water) and stir until one-third of the chocolate is melted. Remove the bowl from the saucepan; keep the steaming water over low heat. Gradually stir the reserved 3/4 cup semisweet chocolate into the bowl, a few pieces at a time, until all of the chocolate is melted. Return the bowl to the saucepan, 5 to 10 seconds at a time, to help melt the chocolate, if needed. Do not rush this step: It may take up to 10 minutes to melt the chocolate.
• Wipe off any moisture from the bottom of the bowl. Stir 3/4 teaspoon peppermint extract into the chocolate, then quickly pour into the prepared baking dish and spread in an even layer. Firmly tap the dish against the counter to remove any air bubbles. Set aside at room temperature until almost set, about 10 minutes.
• Meanwhile, put all but 1 cup of the white chocolate in a large heatproof bowl and repeat the melting process over the steaming water; dry off the bottom of the bowl. Stir in the remaining 3/4 teaspoon peppermint extract; pour over the semisweet chocolate and spread in an even layer. Sprinkle immediately with the crushed candy canes, gently pressing them into the white chocolate. Set aside at room temperature until firm, about 1 hour. Lift the bark out of the pan using the foil and break it into pieces. Store in an airtight container at room temperature for up to 2 weeks.

EASY PEPPERMINT MARSHMALLOWS

Steps:

• Generously grease bottom and sides of 11x7-inch (2-quart) glass baking dish with butter; dust with 1 tablespoon of the powdered sugar. In bowl of stand mixer, sprinkle gelatin over 1/2 cup cold water to soften; set aside.
• In 2-quart saucepan, heat granulated sugar, corn syrup, salt and 1/2 cup water over low heat, stirring constantly, until sugar is dissolved. Heat to boiling; cook without stirring about 30 minutes to 240°F on candy thermometer or until small amount of mixture dropped into cup of very cold water forms a ball that holds its shape but is pliable; remove from heat.
• Slowly pour syrup into softened gelatin while beating on low speed. Increase speed to high; beat 8 to 10 minutes or until mixture is white and has almost tripled in volume. Add peppermint extract; beat on high speed 1 minute. Pour into baking dish, patting lightly with wet hands. Drop food color randomly onto top of marshmallow mixture. Pull table knife through food color to create swirl pattern over top. Let stand uncovered at least 8 hours or overnight.
• Dust cutting board with about 1 tablespoon powdered sugar. Place remaining powdered sugar in small bowl. To remove marshmallow mixture, loosen sides from dish and gently lift in one piece onto cutting board. Using sharp knife greased with butter, cut into 1-inch squares (11 rows by 7 rows). Dust bottom and sides of each marshmallow by dipping into bowl of powdered sugar. Store in airtight container at room temperature up to 3 weeks.

MARSHMALLOW AND PEPPERMINT BARK RECIPE

Steps:

• Spread white chocolate into thin layer on waxed paper-covered baking sheet. Refrigerate 10 min.
• Cover with semi-sweet chocolate; sprinkle with remaining ingredients.
• Refrigerate 4 hours or until firm. Break into pieces or cut into shapes with cookie cutters.