Layered Peppermint Crunch Bark Recipes

LAYERED PEPPERMINT CRUNCH BARK

Steps:

• Turn a large baking sheet bottom side up. Cover securely with foil. Mark a 12x9-inch rectangle on the foil. Stir the white chocolate in metal bowl set over saucepan of barely simmering water (do not allow the bottom of the bowl to touch the water) until the chocolate is melted and smooth and a candy thermometer registers 110°F (the chocolate will feel warm to the touch). Remove the pan from over the water. Pour 2/3 cup of the melted white chocolate onto the marked rectangle on the foil. Using an icing spatula, spread the chocolate to fill the rectangle. Sprinkle with 1/4 cup crushed candy canes. Chill until set, about 15 minutes.
• In a medium saucepan, stir the bittersweet chocolate, cream and peppermint extract over medium-low heat until just melted and smooth. Cool to barely lukewarm, about 5 minutes. Pour the bittersweet chocolate mixture over the white chocolate rectangle. Using an icing spatula, spread the bittersweet chocolate in an even layer. Refrigerate until very cold and firm, about 25 minutes.
• Re-warm the remaining white chocolate in a bowl set over barely simmering water to 110°F. Working quickly, pour the white chocolate over the firm bittersweet chocolate layer; spread to cover. Immediately sprinkle with the remaining crushed candy canes. Chill just until firm, about 20 minutes. If you let the bark go much longer than this- it will be very hard to cut neatly.
• Lift the foil with the bark onto a work surface; trim the edges. Cut the bark crosswise into 2-inch wide strips. Using a metal spatula, slide the bark off the foil and onto the work surface. Cut each strip crosswise into squares. You can also cut the squares diagonally into triangles.

LAYERED PEPPERMINT BARK

Steps:

• Line a 9x12 inch baking pan with aluminum foil or parchment paper.
• Melt half of the white chocolate in the top of a double boiler over just barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. Spread the white chocolate into the prepared pan. Sprinkle 1/4 of the crushed peppermints evenly over white chocolate. Chill until firm, about 15 minutes.
• Meanwhile, melt the dark chocolate, heavy cream, and peppermint extract together in the top of a double boiler over just barely simmering water, stirring frequently, until just melted. Quickly pour the chocolate layer over the chilled white chocolate layer; spread evenly. Chill until firm, about 20 minutes.
• Meanwhile, melt the remaining white chocolate in the top of a double boiler over just barely simmering water, stirring frequently, until just melted. Spread quickly over the chilled bark. Sprinkle with the remaining peppermint pieces; chill until firm, about 20 minutes. Cut or break into small pieces to serve.

LAYERED PEPPERMINT CRUNCH BARK

Steps:

• Turn large baking sheet bottom side up. Cover securely with foil. Mark 12 x 9-inch rectangle on foil. Stir white chocolate in metal bowl set over saucepan of barely simmering water (do not allow bottom of bowl to touch water) until chocolate is melted and smooth and candy thermometer registers 110 degrees F (chocolate will feel warm to touch). Remove from over water. Pour 2/3 cup melted white chocolate onto rectangle on foil. Using icing spatula, spread chocolate to fill rectangle. Sprinkle with 1/4 cup crushed peppermints. Chill until set, about 15 minutes. Stir bittersweet chocolate, cream and peppermint extract in heavy medium saucepan over medium-low heat until just melted and smooth. Cool to barely lukewarm, about 5 minutes. Pour bittersweet chocolate mixture in long lines over white chocolate rectangle. Using icing spatula, spread bittersweet chocolate in even layer. Refrigerate until very cold and firm, about 25 minutes. Rewarm remaining white chocolate in bowl set over barely simmering water to 110F. Working quickly, pour white chocolate over firm bittersweet chocolate layer; spread to cover. Immediately sprinkle with remaining crushed peppermints. Chill just until firm, about 20 minutes. Lift foil with bark onto work surface; trim edges. Cut bark crosswise into 2-inch-wide strips. Using metal spatula, slide bark off foil and onto work surface. Cut each strip crosswise into 3 sections and each section diagonally into 2 triangles. (Can be made 2 weeks ahead. Chill in airtight container.) Let stand 15 minutes at room temperature before serving.

LAYERED PEPPERMINT BARK RECIPE - (4.7/5)

Steps:

• Place the candy canes in a ziptop plastic bag. Using a meat mallet or rolling pin, crush the canes, leaving a few larger pieces. Pour into a small bowl and set aside. Very lightly spray or butter a 13x9 shallow rimmed baking sheet. (Lightly wipe away any excess with a paper towel.) Set aside. Melt the semisweet chips with 1 teaspoon oil in a heavy 1-qt. non-stick saucepan over medium-low/medium heat, stirring constantly until just barely melted and smooth. Remove from heat and stir in 3/4 teaspoon peppermint extract. Immediately pour it into the prepared pan, spreading out evenly. Refrigerate or put in the freezer while you melt the white chips. I washed and used the same saucepan to melt the white chips in the same manner as above (with 1 teaspoon oil until barely melted and smooth; then removed from heat and stirred in 3/4 teaspoon peppermint extract). Very quickly, pour the warm white mixture over the chocolate layer in the pan, spreading evenly and being careful to not disturb the bottom layer. Sprinkle top immediately with the crushed candy, pressing it lightly into the white chocolate. Place in the refrigerator or freezer until hardened. Twist the pan slightly to unset the bottom. Using a sharp knife tip along one edge of the bark, lift the whole sheet of bark out of the pan then break into uneven pieces. Store in an airtight container in the refrigerator.

5-INGREDIENT PEPPERMINT BARK

Steps:

• Lightly grease a 9x9 inch pan and line with waxed paper, smoothing out wrinkles; set aside.
• Place the semisweet chocolate and 1 teaspoon of the canola oil in the top of a double boiler over just barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. When the chocolate is melted, stir in 1/4 teaspoon of the peppermint extract.
• Pour the melted chocolate into the prepared pan, and spread evenly over the bottom of the pan. Sprinkle half of the crushed peppermints over the chocolate layer. Refrigerate until completely hardened, about 1 hour.
• Place the white chocolate and the remaining 1 teaspoon canola oil in the top of a double boiler over just barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. When the chocolate is melted, stir in the remaining 1/4 teaspoon peppermint extract.
• Pour the white chocolate directly over the semisweet chocolate layer; spread evenly. Sprinkle the remaining crushed candy over the top and gently press in. Refrigerate until completely hardened. Remove from pan; break into small pieces to serve.

LAYERED PEPPERMINT CRUNCH BARK

Steps:

• Turn large baking sheet bottom side up. Cover securely with foil. Mark 12 x 9-inch rectangle on foil. Stir white chocolate in metal bowl set over saucepan of barely simmering water (do not allow bottom of bowl to touch water) until chocolate is melted and smooth and candy thermometer registers 110°F. (chocolate will feel warm to touch). Remove from over water. Pour 2/3 cup melted white chocolate onto rectangle on foil. Using icing spatula, spread chocolate to fill rectangle. Sprinkle with 1/4 cup crushed peppermints. Chill until set, about 15 minutes.
• Stir bittersweet chocolate, cream and peppermint extract in heavy medium saucepan over medium-low heat until just melted and smooth. Cool to barely lukewarm, about 5 minutes. Pour bittersweet chocolate mixture in long lines over white chocolate rectangle. Using icing spatula, spread bittersweet chocolate in even layer. Refrigerate until very cold and firm, about 25 minutes.
• Rewarm remaining white chocolate in bowl set over barely simmering water to 110°F. Working quickly, pour white chocolate over firm bittersweet chocolate layer; spread to cover. Immediately sprinkle with remaining crushed peppermints. Chill just until firm, about 20 minutes.
• Lift foil with bark onto work surface; trim edges. Cut bark crosswise into 2-inch-wide strips. Using metal spatula, slide bark off foil and onto work surface. Cut each strip crosswise into 3 sections and each section diagonally into 2 triangles. (Can be made 2 weeks ahead. Chill in airtight container.) Let stand 15 minutes at room temperature before serving.

PEPPERMINT BARK

Steps:

• Spread 1/3 of the peppermint candy over a 9x13-inch baking pan lined with wax paper.
• Melt the milk chocolate in the top of a double boiler over just-barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching, just until melted. Pour the melted chocolate over peppermint candy in the prepared pan. Sprinkle another 1/3 of the candy on top of the milk chocolate. Refrigerate until the chocolate hardens, about 30 minutes.
• Melt the white chocolate in the top of a double boiler over just-barely simmering water, stirring frequently and scraping down the sides with a rubber spatula to avoid scorching. Stir in the oil-based peppermint flavoring. Pour the white chocolate over the milk chocolate, then spread the remaining 1/3 peppermint candy on top.
• Refrigerate until the white chocolate hardens, about 30 minutes. Cut or break into pieces to serve.

TRIPLE LAYER PEPPERMINT BARK

Steps:

• Gather the ingredients.
• Put a gallon zipper bag inside a second zipper bag. Remove the plastic wrap from the peppermint candy and put the candy inside the gallon size zipper bags.
• Zip up both bags and then crush the peppermint candies with a meat tenderizer or a hammer (it should equal 1/2 cup crushed).
• Melt 1 bag of white chocolate chips in a bowl over boiling water stirring until smooth (the water should not touch the bowl). When it is smooth, turn off the heat. Stir in 1/4 cup of crushed peppermint.
• Pour the melted white chocolate chip and peppermint mixture over a small cookie sheet lined with parchment paper and smooth out towards the edges. Refrigerate for 20 minutes.
• Melt the bag of semi-sweet chocolate chips in a bowl over boiling water stirring until smooth (again, the water should not touch the bowl). When the chocolate is smooth, turn off the heat. Stir in 1/4 tsp peppermint oil into the semi-sweet chocolate.
• Pour the semi-sweet chocolate over the white chocolate layer. Smooth out over the white layer by smoothing out towards the edges and not back and forth. Refrigerate for another 20 minutes.
• Melt the last bag of white chocolate chips in a glass bowl over boiling water stirring until smooth (the water should not touch the bowl).
• Pour the melted white chocolate over the semi-sweet chocolate layer. Smooth out the white layer by smoothing it out towards the edges and not back and forth.
• Sprinkle the remaining crushed peppermint candy over the white chocolate. Refrigerator for another 20 minutes.
• Take the refrigerated bark out and let it sit on the counter for 10 minutes to cut the chill. This will make it easier to cut without the layers coming apart.
• Next, cut the bark into pieces.
• Each type of chocolate for this peppermint bark can be melted in the microwave. To microwave, put the chocolate or white chips in a glass bowl. Cook for 30-second intervals. Stir in between intervals so it cooks evenly. When the chocolate is smooth, it's ready. At this point, follow the directions above.