Chocolate Seafoam Recipes

OLD-FASHIONED SEA FOAM CANDY

Steps:

• Butter or oil an 8 inch square baking pan; set aside.
• Put sugar, vinegar, syrup, and water in a heavy 4 quart saucepan (cast iron if you have it). Gently heat the mixture, stirring with a wooden spoon, until sugar has dissolved and syrup has melted. Bring to a boil, cover and boil for 3 minutes, then remove lid and boil until temperature reaches 285 degrees F (140 degrees C) on a candy thermometer. Remove from heat and stir in the baking soda, mixing well to allow bubbles to subside a little.
• Pour hot mixture into prepared pan and leave until just beginning to set. Mark into squares with a lightly oiled knife. Leave to set completely. Cut or break into pieces.
• Combine chocolate chips, shortening, and baking chocolate in a 2-quart glass bowl. Microwave on High for 2 minutes to melt. Stir with a wooden spoon. Dip candy pieces into chocolate, covering completely. Let cool on waxed paper.
• Wrap individually in waxed paper, twisting the ends together, and store in an airtight container.

SEA FOAM CANDY

Steps:

• Combine light brown and white sugars, water, corn syrup, and salt in a heavy 2 quart saucepan. Cook covered until mixture boils rapidly. Remove lid, place candy thermometer in pan, and cook without stirring to 260 degrees F (127 degrees C). Remove from heat.
• Beat egg whites until stiff. Pour hot syrup in thin stream over egg whites, beating constantly with electric mixer on high speed. Add vanilla and pecan flavoring.
• Continue beating until soft peaks form and candy starts to lose its gloss. Stir in pecans and drop by spoonfuls onto waxed paper. When candy has set, store in airtight container.

OLD FASHIONED SPONGE CANDY (SEAFOAM)

Steps:

• 1. Combine sugar,syrup and vinegar in a large deep saucepan over medium heat, stirring until sugar dissolves. Then continue cooking WITHOUT stirring until 300^ on candy thermometer. Remove quickly and stir in soda(it will foam up high), mix well and pour right away into a buttered 9x13-inch baking pan. DO NOT SPREAD OUT, AIR WILL BE DEFLATED and candy will stick to teeth...When cool; break into pieces. --- Note: If you desire you can spread 1 cup of chocolate chips, white chips, butterscotch chips or mint chips on the hot candy in the pan and spread to coat the top and sprinkle with nuts before it cools.

CHOCOLATE COVERED SEAFOAM RECIPE - (4.4/5)

Steps:

• Generously grease 3 cake pans and set aside. 2. In a large saucepan, bring sugar and syrup to a boil over medium heat. Stir constantly until sugar is dissolved. 3. Bring sugar mixture up to 305 degrees, stirring occasionally. (I've found that in order to not burn the candy, it's easiest to remove the pan from the heat when the sugar mixture reaches 300 degrees. The candy temperature will continue to rise for a few seconds and leaving it on the heat brings the temperature up too quickly, resulting in burned candy. Not fun...trust me!) 4. Pour baking soda into syrup all at once. Sugar mixture will foam up quickly--be careful! 5. Mix thoroughly and quickly. Pour into greased pans. 6. Allow the candy to cool for a couple hours before breaking into pieces. 7. Melt chocolate chips in a microwave safe bowl. 8. Dip seafoam into chocolate and set on waxed paper to harden. Store in an airtight container.

SEAFOAM ICING

Steps:

• Put first six ingredients in top of double boiler and place over boiling water.
• Beat on low speed until ingredients are thoroughly mixed. Cook on medium heat. Cook beating constantly on high speed until icing stands by itself.(about 5 min.) Remove from heat. Add 1 teas. vanilla. Beat for 1 more minute.