Authentic Chili Oil Recipes

HOW TO MAKE CHILI OIL

Steps:

• Gather all the aromatics you plan to use. Place oil and selected aromatics into a pot with at least two inches of clearance between the oil and the rim of the pot. If using minimum aromatics, 1 ½ cups of oil should do it. If using all the aromatics, you can add up to 3 cups of oil.
• Set it over medium heat to start, then progressively lower it to medium low or low heat as the oil comes to temperature. The oil should be at about 225-250° F / 110-120° C and causing small bubbles to slowly rise from the aromatics. If you notice the spices sizzling more vigorously than that or turning dark too quickly, reduce the heat to cool it down. If you are not achieving small bubbles, slowly increase the heat. Hovering around 200-225° F is the safest way to prevent burning. Infuse the aromatics this way for a minimum of 30 minutes, or up to 1 hour for best results.
• While the oil is infusing, prepare your Sichuan chili flakes by placing them in a heatproof bowl. If you used 1½ cups of oil, ¾ cup of chili flakes is best. For 3 cups of oil, use 1¼ cups of chili flakes. You can experiment within this range (if you like more oil and fewer flakes, for instance).
• Generally, the oil should be between 225-250° F (110-120° C) when pouring over the chili flakes. If you like a darker color, opt for 250-275° F/135° C. If your chili flakes are already super roasted, you may want to be closer to 225° F/110° C. When in doubt, test the oil on a small bowl of chili flakes before you do the rest. Carefully pour the hot oil through a strainer onto the chili flakes. Stir to evenly distribute the heat of the oil. You'll know you've gotten it right when you smell a "popcorn"-like smell that is not at all burnt-smelling.
• Stir in the salt, and allow the chili oil to cool. Store in airtight containers in the refrigerator. Always use a clean utensil when handling to prevent spoilage. It can last for up to 6 months if handled in this way.

CHILI OIL

Steps:

• Combine the oil and crushed red pepper flakes in a heavy small saucepan. Cook over low heat until a thermometer inserted into the oil registers 180 degrees F, about 5 minutes.
• Remove from heat. Cool to room temperature, about 2 hours. Transfer the oil and pepper flakes to a 4-ounce bottle. Seal the lid. Refrigerate up to 1 month.

AUTHENTIC 1840 TEXAS CHILI

Steps:

• Render the fat to liquid.
• Add the beef, and brown lightly, then add onions and garlic.
• (IMPORTANT Do NOT drain the fat or drippings).
• Cook over medium heat, until onions are translucent, then add spices, stirring gently until blended.
• Continue over low heat for at least two hours, stirring every 30 minutes.
• Add salt to taste, though it doesn't need much.
• If it gets too thick, you can add water, but remember that chili is reputed to be able to stand a spoon up straight!
• Its edible after two hours, but improves vastly with time, so don't be afraid to cook 6 or 8 or ten hours --
• After you've tried the "original" recipe as above, you could add one or two jalapeno's, a single tomato and/or green pepper, just to fully appreciate how far this dish has evolved -- .