Serviettenapkin Folding Elegant Basic Roll Recipes

SERVIETTE/NAPKIN FOLDING, THE SIMPLE POCKET

Steps:

• Lay your serviette square out flat before you.
• Fold the top and bottom left hand edges to meet the top and bottom right hand edges. You will have a long rectangle with the fold on the left hand edge.
• Fold the bottom short edge up about 1/3 of the way up the rectangle. Then repeat another 1/3 of the way up.
• Carefully turn the serviette over and fold the top and bottom East edge to the centre.
• Repeat with the West edge.
• Carefully turn this over again and you will have a neat package that has a pocket at the bottom into which a nametag, cutlery, flowers or a small gift can be inserted.

STEP BY STEP NAPKIN / SERVIETTE FOLDING

Steps:

• Take your square napkin, lay it totally flat before you, then fold it in half horizontally.
• Fold again, this time vertically so that you have before you a square a quarter the size of your origonal square.
• Only one of the 4 corners will have 4 open or loose edges. Rotate the square before you so that it looks like a diamond with the four open edges pointing to the bottom.
• We will call the points on your diamond shape East, West, North and the open egded bit, South.
• Make a horizontal fold between the East/West points, bringing the open ended South point up to meet, and on top of, the North point.You will now have a little triangle.
• Take the East point of the triangle and fold it in towards the middle. What was the sloping right hand edge of the triangle is now a vertical edge running down the center of the triangle and there is a little flap sticking out at the bottom.
• Take the West point and fold it into the center the same as you did with the previous East edge, the two vertical lines should meet in the middle, and you will have a diamond shape that has two long sides at the top and two short sides (the two little flaps) at the bottom.
• Pick up your diamond shape and fold the two little flap bits at the bottom completely under, so that they only show on the back of the triangle. The front will now look like a steep triangle with a vertical slit down the middle.
• We will call the points of this triangle East, West and North. With the flaps still folded to the back of the tiangle, fold the East and West points backwards until they meet, and gently crease the two folds that form and meet at the North point.
• The slit in the front will have opened and the 4 open points of the napkin will be hidden in layers inside. Pull very gently on them one by one and they will stand up like the sails of a boat. Some people I know call this napkin a boat, some a flower and some the Sydney Opera House.I don't know its' offical name but set onto a plate or into an empty wine glass, this a very elegant addition to a classy table setting.

SERVIETTE/NAPKIN FOLDING, ELEGANT BASIC ROLL

Steps:

• Lay your serviette square out flat before you in the shape of the square.
• Fold the bottom left and right corners up to meet the top left and right corners so that you now have a rectangle shape with the crease at the bottom.
• Take the top and bottom right corners and roll them all the way to the left top and bottom corners.
• Slip the serviette ring over the rolled end and bring up to the half way point. Set the serviette on a plate with the join at the back and the closed neat part of the roll facing the top.

SERVIETTE/NAPKIN, BASKET

Steps:

• Lay your serviette out flat before you in a square.
• Take the top left and top right corner and bring them 1/3rd of the way down the square.
• Now take the bottom left and bottom right corners and bring them up to meet the new corners at the top. You will have before you a long rectangle that is 1/3rd the width of your original servietter square.
• Take the top let and bottom let corners and fold them 2/3rd of the way towards the right.
• Place your finger about half way down the line that now runs vertically down the serviette at the 2/rd mark, and with your other hand, bring the bottom right corner of the flap folded in the previous step, up to meet your finger in the center. This should produce a horizontal band in the center if the left 2/3rd of the serviette, and the bottom left corner should turn into a triangle.
• Now repeat by bringing the top right corner of the flap at 2/3rds down to meet the bottom crease fold of the band you just made. Once it's flattened out it there will second band directly above the first and another triangle will appear in the top left corner of the serviette.
• Take the free end of the band in the center of the serviette and fold it back over to the left so that it sticks out to the left, past the left edge of the serviette.
• Now take the top right and bottom right of the serviette and bring it over to the left so that what *were* the right edges of the serviette not are level with the outer edge of the band that's sticking out on the left. You will have before you a square shape.
• Place your finger in the center of the left edge and with your other hand, bring the bottom left corner up to meet your finger. This should make a flat horizontal band in the middle again and a triangle will form in the bottom right corner.
• Finish this band by bringing the top left corner of the serviette down to meet the bottom crease mark of the band you have just made, and as before a second band will form directly above the first and the last triangle should form in the top right corner.
• As with the previous side, take the long loose end of the band on the left and fold it back on itself so that it sticks out on the right side. Your serviette will now look something like a rowboat with very fat oars in the middle that stick out on each side.
• Place your fingers inside the triangles in the center of the serviette and holding the left and right ends very firmly, turn the serviette inside out. It will look a tad messy at first but the square box form should be there, and I neatened mine up considerably by easing everything into place.
• To make this serviette really impressive, carefully hold the little serviette basket open on each side in turn, while ironing the inside of the four sides.
• Fill your basket with a bread roll, a cookie, a few crackers, a small gift, party favours and confetti -- in fact, whatever takes your fancy.

SERVIETTE/NAPKIN FOLDING, SIMPLE PLEATED SCROLL

Steps:

• Lay your serviette square out flat before you.
• Take the bottom left and bottom right corners and fold them up 1/3rd of the way towards the top of the serviette.
• Then fold the top left and top right corners down 1/3rd of the way. You will now have a long thin rectangle that is 1/3rd the width of the serviette sequare.
• Take the top flap and roll it up several times over itself ( twice or three times depending on how large your serviette is)so that it forms a little pleat (horizontally) half way along the center of the serviette.
• Carefully turn the serviette over so that the pleat that you just made is on the back side, then carefully turn the serviette around so that one of the narrow ends is closest to you.
• Roll up the serviette starting from the shortest end closest to you and finishing at the very top. The finished serveitte will have a nice pleat in the middle.
• Place the serviette onto a plate with the end flap undernieth to conceal it.

SERVIETTE/NAPKIN FOLDING,, A SIMPLE ELEGANT CYLINDER

Steps:

• Lay your serviette square out flat before you in a diamond shape. Bring the bottom "South" point up to the "north" point of the diamond shape and you will now have a triangle shape with the crease at the bottom.
• Depending on how big your serviettes are, fold 1 1/2 to 2 1/2 inches (4-7 cm) back undernieth the fold edge of the triangle. The bigger the serviette the deeper this fold will be.
• Take the "east" point of the triangle and start rolling it up towards the "west" point of the triangle. When you get to the "west" edge tuck the "west" edge into to pleat that forms at the bottom.
• Turn the serviette over so that the neat front side is showing.
• A small bloom can be inserted into the pleat at the bottom if you wish.

SERVIETTE NAPKIN FOLDING , BASIC WITH NAPKIN RING

Steps:

• Lay your serviette square out flat before you. Fold it in half horizontally.
• Take the serviette and fold it in half again vertically so that it is now a small square a quarter the size of the origonal square.
• Only one corner of the square will have 4 open / loose edges, rotate your square so that it is a flat diamond shape with the open corner pointing downwards. We will call this the South corner, and the top corner opposite North.
• Grasp your serviette about 2/3 of the ways up and starting at point that is on the East side of your serviette, make 5 folds or pleats more or less the same size, folding/ pleating towards from the East point to the West point.
• Slip your Serviette Ring over the north point and gently pull downwards so that only the top 1/3 of the serviette goes though the ring. Keep the north point of the serviette nicely centered.
• Spread the bottom half out the serviette into a fan formation so that both halves are equal and it looks pleasingly balanced.The top of the serviette should taper gently up to the North point and if wanted a small flower can be inserted into the fold at the top and down into the napkin ring.
• Place on empty plate.

SERVIETTE/NAPKIN FOLDING, ELEGANT SAIL

Steps:

• Lay your serviette square out flat before you in a square shape.
• Fold the bottom left and right corners to meet the top left and right corners. You will now have a rectangle with the crease along the bottom edge.
• Place your finger at the center of the top edge, with your other hand fold the bottom right hand corner to meet your finger.
• Now take the very top right hand corner, and fold it to the very top left hand corner. You should now have a square shape with a diagonal line running from top left to bottom right.
• Take the bottom left hand corner and fold it up to the top right and corner.You will now have a right-angle triangle (the right-angle being in the top right hand corner).
• Pick up the serviette so that the right-angle is facing away from you in the North position. Carefully open the inside folds so that you have something that resembles an ice cream cone (but with one side of the top higher than the other)The side closest to you will have all 4 loose corners visible.
• The side with the right-angle triangle will be the lowest point of the cone shape. Grasp this place ( it's also where the join is) firmly and carefully turn it it a little inside out, so that a small cuff is made all the way around. The bottom of your ice cream cone is now an elegant cone shaped sail and the cuff rises at one end like a little boat.