Chilli Oil With Fresh Chillies Recipes

HOW TO MAKE CHILI OIL

Steps:

• Gather all the aromatics you plan to use. Place oil and selected aromatics into a pot with at least two inches of clearance between the oil and the rim of the pot. If using minimum aromatics, 1 ½ cups of oil should do it. If using all the aromatics, you can add up to 3 cups of oil.
• Set it over medium heat to start, then progressively lower it to medium low or low heat as the oil comes to temperature. The oil should be at about 225-250° F / 110-120° C and causing small bubbles to slowly rise from the aromatics. If you notice the spices sizzling more vigorously than that or turning dark too quickly, reduce the heat to cool it down. If you are not achieving small bubbles, slowly increase the heat. Hovering around 200-225° F is the safest way to prevent burning. Infuse the aromatics this way for a minimum of 30 minutes, or up to 1 hour for best results.
• While the oil is infusing, prepare your Sichuan chili flakes by placing them in a heatproof bowl. If you used 1½ cups of oil, ¾ cup of chili flakes is best. For 3 cups of oil, use 1¼ cups of chili flakes. You can experiment within this range (if you like more oil and fewer flakes, for instance).
• Generally, the oil should be between 225-250° F (110-120° C) when pouring over the chili flakes. If you like a darker color, opt for 250-275° F/135° C. If your chili flakes are already super roasted, you may want to be closer to 225° F/110° C. When in doubt, test the oil on a small bowl of chili flakes before you do the rest. Carefully pour the hot oil through a strainer onto the chili flakes. Stir to evenly distribute the heat of the oil. You'll know you've gotten it right when you smell a "popcorn"-like smell that is not at all burnt-smelling.
• Stir in the salt, and allow the chili oil to cool. Store in airtight containers in the refrigerator. Always use a clean utensil when handling to prevent spoilage. It can last for up to 6 months if handled in this way.

HOW TO MAKE CHILE OIL

Steps:

• Gather the ingredients.
• Prepare a clean, dry glass bowl or jar and place the crushed chile peppers in it.
• In a small saucepan, heat the oil over medium heat for a few minutes, just until it begins to smoke. Remove the pan from the heat and allow the oil to cool in the pan for a minute or two. Be mindful that olive oil has a low smoking point and if heated up too much for too long, its flavor can change.
• Slowly and carefully pour the oil over the crushed chile peppers, making sure that the oil completely covers them. If necessary, use a spoon to stir so that all the chile is submerged. If using the whole chiles, add them now, and stir.
• Set the oil aside to cool for at least an hour or two.
• Once cooled, you can taste the oil. If it's to your liking, strain the oil to remove the crushed chile peppers. If you'd like more heat and flavor, cover the oil and allow it to infuse overnight or for as long as desired before straining-if choosing to do so, as the crushed chile will settle on the bottom of the jar, and you can use it along with the oil as a condiment.
• Once strained, store the oil in a clean, airtight glass container. If you used whole dried chile peppers, they can be returned to the oil to gradually intensify its color and flavor. If left unstrained, the infusion will continue to mature, and the heat factor will amplify.

FRESH DRIED CHILI OIL

Steps:

• Crush chilies with fingers into pieces no bigger than 1/4 inch across. Place in small bowl and add just enough boiling water to cover, about 1 tablespoon; let sit until chili is hydrated, 10 minutes.
• Add garlic and mint, and mix while slowly adding olive oil. Taste and season with salt. For best flavor, make several hours before using.